Antares 1.25" 5x Barlow Lens # UB5S
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
Product Details
This 1.25" 5x Antares high performance barlow # UB5S features a fully-multicoated achromatic design. This short barlow will work in diagonals or reflectors, has internal darkening and edge-blackened lenses, and is parfocal with most eyepieces. It features a clear aperture of 18mm. Suitable for high contrast, high power applications in any telescope. Made in Canada.
Specifications:
- Barrel size: 1.25" / 31.7mm
- Magnification factor: 5x
- Type: Achromatic
- Coatings: Fully multicoated
- Clear aperture = 0.71" / 18mm
- Weight: 4.3oz / 122g
- Total length: 3.17" / 80.4mm
- Length of lower chrome barrel: 1.48" / 37.5mm
- Length of upper black barrel: 1.69" / 42.9mm
- Filter threads: No
- End caps: Yes (2) but subject to change without notice
- Country: Made in Canada
Note that the use of any optical element like barlows and focal reducers changes the focus point of your telescope, requiring additional in-focus or out-focus travel. The exact amount of focus travel required will depend on the optics and mechanics of your specific set-up (telescope, diagonal (if used), barlow, and eyepiece). Hence, be aware that you may not be able to reach focus with all eyepieces or in all configurations with a given barlow.
Please note: This is a very high magnification barlow. It is not for everyone or for common viewing conditions. Before buying, please make sure that you are using realistic magnifications with your telescope. A good rule of thumb is that under very good conditions and with a very good telescope, the maximum power you will be able to use is about 50x of magnification per inch of telescope aperture. With average telescopes and/or average conditions, you should be able to use 30x of magnification per inch of telescope aperture. So for example, if you have a 6" telescope, under typical conditions you will be limited to 6x30 = 180x of magnification, and 6x50 = 300x of magnification at best.
Boosting the magnification beyond this recommended maximum for your telescope aperture is not realistic. This is bound to result in image break-down, causing fuzzy images, focusing difficulties, increased color around objects (caused by other optical elements in the telescope which are magnified by the barlow) and general disappointment, but this is not a fault of the barlow.
