Announcing the Self-Centering Camera T-Adapter for Astrophotographers. The Self-Centering Adapter (SCA) mechanism provides repeatable and reliable connection between your telescope and the camera. The SCA T-Adapter fits any make telescope that uses a 1.25" focuser or visual back. Use your existing T-Ring matchesyour brand of camera andthread onto the SCA T-Adapter.
The HoTech SCA T-Adapter Brings your Camera to the Closest Optical Axis in the Drawtube/Visual back for BEST Imaging Result
To capture great images from your telescope, it is essential to position your camera firmly inand on the optical axis of your drawtube/visual back. The SCA T-Adapter center loadsyour camera in the drawtube/visual back with a simple threading of a compression ring forcing the built-in rubber rings outward radially, thereby centering the camera in the drawtube/visual back for optimal installation.
Eliminates Drawtube/Visual Back Slop
All drawtube/visual back have manufacturing tolerances. And it requires larger diameter to accept various eyepieces and adapters. When the camera adapter is inserted, the gap between the drawtube/visual back and the inserting device became a slop problem. The rubber rings in the SCA expand radially according to users own adjustment to fill the gaps. This makes your camera seats firmly in your drawtube/visual back becoming part of your telescope for a secure and repeatable installation.
Eliminates unstable locking from thumbscrew or unified compression ring
The optical axis is shifted when the inserting device is locked in by thumbscrew. In some cases, a poorly made unified compression ring can cause an unstable tilt when locking in the drawtube due to loose tolerances between the compression ring, inner groove, and the uneven tip of the locking thumbscrew in a drawtube. The SCA T-Adapter adapts your camera without using the thumbscrew or the unified compression ring.
Accepts the Imperfection of a Drawtube/Visual Back
Small imperfection inside the drawtube like dents and scratches, the rubber rings fill the gaps and faithfully centers your camera in the tube. In addition, even if the drawtube is slightly deformed in diameter, egg-shape, the rubber rings in the SCA will compensate the differences and faithfully centers your camera.
SCA Profile Prevents Oscillation
Short profile design keeps the installed camera stable from low frequency oscillation transferred from the telescope in a windy environment. The back focus of a 1.25" SCA T-Adapter is 18mm (0.71") measured from drawtube shoulder to the bottom T-Thread.
The all-around adjustable tightness rubber contact damps unwanted vibrations from the telescope provides you a sturdy attachment on your telescope for a stable image capture.
Accepts Filter Thread
1.25" T-Adapter has a built-in 1.25" (M28.5x0.6) filter thread.