William Optics 2" 0.8x Apo Reducer / Field Flattener 6
This item is discontinued by the manufacturer and is no longer available.
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- Reduces f/6 to f/4.7
- Lens-to-chip suggested distance: 55-57mm
- Fully multicoated optics
- Includes T-ring thread
- Includes 2" nose-piece with SCT male and M48 female threads
- Weight : 165g
The new William Optics 0.8x Reducer Flattener 6 has been developed specifically for the William Optics ZS71 and other F6 Williams Optics refractors such as the ZS70, Megrez 72, ZS66, etc (but not for the GT81). It should also work successfully with other manufacturer's f/6 (+/-) telescopes of similar aperture. It provides good illumination and flat field across APS sized and smaller sensors.
The flattener features a standard male T thread (M42x0.75) on the camera end. The telescope end of the 2" nosepiece has a male SCT thread (2"x24tpi) on the outside and a standard 2" filter thread (M48x0.75) on the inside. So not only can you attach your favorite astronomy filters to this flattener, you can also couple it directly with female SCT threaded items (such as the tube of the ZS66 telescope). The 2" nosepiece features a recessed safety groove as well.
Weight = 8.6oz; Total length = 2.65" (67.3mm); includes 2 end caps.
The new William Optics 0.8x Reducer Flattener 6 has been developed specifically for the William Optics ZS71 and other F6 Williams Optics refractors such as the ZS70, Megrez 72, ZS66, etc (but not for the GT81). It should also work successfully with other manufacturer's f/6 (+/-) telescopes of similar aperture. It provides good illumination and flat field across APS sized and smaller sensors.
The flattener features a standard male T thread (M42x0.75) on the camera end. The telescope end of the 2" nosepiece has a male SCT thread (2"x24tpi) on the outside and a standard 2" filter thread (M48x0.75) on the inside. So not only can you attach your favorite astronomy filters to this flattener, you can also couple it directly with female SCT threaded items (such as the tube of the ZS66 telescope). The 2" nosepiece features a recessed safety groove as well.
Weight = 8.6oz; Total length = 2.65" (67.3mm); includes 2 end caps.
- Reduces f/6 to f/4.7
- Lens-to-chip suggested distance: 55-57mm
- Fully multicoated optics
- Includes T-ring thread
- Includes 2" nose-piece with SCT male and M48 female threads
- Weight : 165g
The new William Optics 0.8x Reducer Flattener 6 has been developed specifically for the William Optics ZS71 and other F6 Williams Optics refractors such as the ZS70, Megrez 72, ZS66, etc (but not for the GT81). It should also work successfully with other manufacturer's f/6 (+/-) telescopes of similar aperture. It provides good illumination and flat field across APS sized and smaller sensors.
The flattener features a standard male T thread (M42x0.75) on the camera end. The telescope end of the 2" nosepiece has a male SCT thread (2"x24tpi) on the outside and a standard 2" filter thread (M48x0.75) on the inside. So not only can you attach your favorite astronomy filters to this flattener, you can also couple it directly with female SCT threaded items (such as the tube of the ZS66 telescope). The 2" nosepiece features a recessed safety groove as well.
Weight = 8.6oz; Total length = 2.65" (67.3mm); includes 2 end caps.