3D Astro Bahtinov Focus Mask for SkyWatcher Espirit 100mm ED Refractor
This item is discontinued by the manufacturer and is no longer available.
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Bahtinov mask to aid in focusing your SkyWatcher Espirit 100ED Refractor. Will also work with any scope with an outer dewshield diameter of 146mm or marginally smaller.
With the mask on, you can see a diffraction spike pattern. Focus until you achieve a symetrical pattern. Once the best focus has been achieved, you can remove the mask and use the guide scope as normal.
This mask is deliberately designed to fit loosely over the guidescope dewshield so that it can be removed very easily when focusing is accomplished. It does not have a firm fit like an end cap would so that the imaging setup isn’t disturbed when you take this off.
3D printed from PLA.
Color of current stock is silver-gray but is subject to change without notice.
Other Information
- Country of Manufacture: United States
Bahtinov mask to aid in focusing your SkyWatcher Espirit 100ED Refractor. Will also work with any scope with an outer dewshield diameter of 146mm or marginally smaller.
With the mask on, you can see a diffraction spike pattern. Focus until you achieve a symetrical pattern. Once the best focus has been achieved, you can remove the mask and use the guide scope as normal.
This mask is deliberately designed to fit loosely over the guidescope dewshield so that it can be removed very easily when focusing is accomplished. It does not have a firm fit like an end cap would so that the imaging setup isn’t disturbed when you take this off.
3D printed from PLA.
Color of current stock is silver-gray but is subject to change without notice.
Bahtinov mask to aid in focusing your SkyWatcher Espirit 100ED Refractor. Will also work with any scope with an outer dewshield diameter of 146mm or marginally smaller.
With the mask on, you can see a diffraction spike pattern. Focus until you achieve a symetrical pattern. Once the best focus has been achieved, you can remove the mask and use the guide scope as normal.
This mask is deliberately designed to fit loosely over the guidescope dewshield so that it can be removed very easily when focusing is accomplished. It does not have a firm fit like an end cap would so that the imaging setup isn’t disturbed when you take this off.
3D printed from PLA.
Color of current stock is silver-gray but is subject to change without notice.
Other Information
- Country of Manufacture: United States