3D Astro Bahtinov Focus Mask for ZWO 60mm Guide Scope

This item is discontinued by the manufacturer and is no longer available.
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Bahtinov mask to aid in focusing your ZWO 60mm Guide Scope or any other guide scope with an outside dewshield diameter of 66.80mm.
We're not sure how necessary or effective this might be on a small-aperture guidescope, but several people have expressed interest in this item, so here it is.
With the mask on, you can see a diffraction spike pattern. Focus until you achieve a symetrical pattern. Once the best focus has been achieved, you can remove the mask and use the guide scope as normal.
This mask is deliberately designed to fit loosely over the guidescope dewshield so that it can be removed very easily when focusing is accomplished. It does not have a firm fit like an end cap would so that the imaging setup isn’t disturbed when you take this off.
3D printed from PLA.
Color of current stock is silver-gray but is subject to change without notice.
Other Information
- Country of Manufacture: United States
Bahtinov mask to aid in focusing your ZWO 60mm Guide Scope or any other guide scope with an outside dewshield diameter of 66.80mm.
We're not sure how necessary or effective this might be on a small-aperture guidescope, but several people have expressed interest in this item, so here it is.
With the mask on, you can see a diffraction spike pattern. Focus until you achieve a symetrical pattern. Once the best focus has been achieved, you can remove the mask and use the guide scope as normal.
This mask is deliberately designed to fit loosely over the guidescope dewshield so that it can be removed very easily when focusing is accomplished. It does not have a firm fit like an end cap would so that the imaging setup isn’t disturbed when you take this off.
3D printed from PLA.
Color of current stock is silver-gray but is subject to change without notice.
Bahtinov mask to aid in focusing your ZWO 60mm Guide Scope or any other guide scope with an outside dewshield diameter of 66.80mm.
We're not sure how necessary or effective this might be on a small-aperture guidescope, but several people have expressed interest in this item, so here it is.
With the mask on, you can see a diffraction spike pattern. Focus until you achieve a symetrical pattern. Once the best focus has been achieved, you can remove the mask and use the guide scope as normal.
This mask is deliberately designed to fit loosely over the guidescope dewshield so that it can be removed very easily when focusing is accomplished. It does not have a firm fit like an end cap would so that the imaging setup isn’t disturbed when you take this off.
3D printed from PLA.
Color of current stock is silver-gray but is subject to change without notice.
Other Information
- Country of Manufacture: United States
