Bob's Knobs for Celestron C14 f/11 Secondary with Factory Phillips Collimation Screws with Standard Threads
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Contiguous US / Lower 48:
Free shipping applies to orders over $50 using our chosen carrier/method. Faster paid options are available at checkout.
Alaska, Hawaii & US Territories:
Free shipping applies to many—but not all—products. Enter your ZIP code in cart or upon checkout to confirm options and costs.
International:
International orders do not qualify for free shipping. Shipping, duties, brokerage, tariffs, and taxes are the customer’s responsibility. Some items may be restricted due to export, size, or manufacturer limitations.
Special Note: The Celestron 14” SCT uses either standard 6-32 or metric M3 collimation screws. Headless set-style and silver Phillips factory collimation screws have standard threads. Generally black Phillips collimation screws have metric threads but a few have standard threads.
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: C14stdphi
Fits: Celestron 14" (36 cm) f/11 SCT versions with standard-thread Phillips collimation screws with standard threads, with or without Fastar (see second photo).
Knobs: Black plastic, 16 mm (5/8") diameter (standard thread)
Threads: Black anodized aluminum alloy (standard thread)
Notes:
- See the special note above for information on standard and metric threads.
- The factory dust cover will fit normally with Bob's Knobs installed.
- If your telescope has a rotary secondary cover, it must remain open when knobs are installed. The cover is cosmetic only and will not affect operation of the telescope.
- Our knobs cannot protrude above the Trifid-style rotary cover or they will interfere with the factory dust cover. For better knob access, you can peel off the vinyl escutcheon and remove this cover (see third photo) or simply access the knobs partly from the side.
Other Information
- Country of Manufacture: United States
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: C14stdphi
Fits: Celestron 14" (36 cm) f/11 SCT versions with standard-thread Phillips collimation screws with standard threads, with or without Fastar (see second photo).
Knobs: Black plastic, 16 mm (5/8") diameter (standard thread)
Threads: Black anodized aluminum alloy (standard thread)
Notes:
- See the special note above for information on standard and metric threads.
- The factory dust cover will fit normally with Bob's Knobs installed.
- If your telescope has a rotary secondary cover, it must remain open when knobs are installed. The cover is cosmetic only and will not affect operation of the telescope.
- Our knobs cannot protrude above the Trifid-style rotary cover or they will interfere with the factory dust cover. For better knob access, you can peel off the vinyl escutcheon and remove this cover (see third photo) or simply access the knobs partly from the side.
Special Note: The Celestron 14” SCT uses either standard 6-32 or metric M3 collimation screws. Headless set-style and silver Phillips factory collimation screws have standard threads. Generally black Phillips collimation screws have metric threads but a few have standard threads.
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: C14stdphi
Fits: Celestron 14" (36 cm) f/11 SCT versions with standard-thread Phillips collimation screws with standard threads, with or without Fastar (see second photo).
Knobs: Black plastic, 16 mm (5/8") diameter (standard thread)
Threads: Black anodized aluminum alloy (standard thread)
Notes:
- See the special note above for information on standard and metric threads.
- The factory dust cover will fit normally with Bob's Knobs installed.
- If your telescope has a rotary secondary cover, it must remain open when knobs are installed. The cover is cosmetic only and will not affect operation of the telescope.
- Our knobs cannot protrude above the Trifid-style rotary cover or they will interfere with the factory dust cover. For better knob access, you can peel off the vinyl escutcheon and remove this cover (see third photo) or simply access the knobs partly from the side.
Other Information
- Country of Manufacture: United States