Chroma LRGB Imaging Filter Set - 50mm Round Unmounted
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Contiguous US / Lower 48:
Free shipping applies to orders over $50 using our chosen carrier/method. Faster paid options are available at checkout.
Alaska, Hawaii & US Territories:
Free shipping applies to many—but not all—products. Enter your ZIP code in cart or upon checkout to confirm options and costs.
International:
International orders do not qualify for free shipping. Shipping, duties, brokerage, tariffs, and taxes are the customer’s responsibility. Some items may be restricted due to export, size, or manufacturer limitations.
- Engineered for deep-sky CCD & CMOS astrophotography.
- LRGB 50 mm unmouted filter set for compatability with a wide array of filter wheels.
- Parfocal for systems f/4.0 or slower.
Chroma LRGB Filters for Broadband Imaging
The Chroma 50 mm LRGB Filter Set is engineered specifically for serious deep-sky CCD and CMOS imaging, delivering exceptional optical precision and reliability in one premium package. This set includes four 50 mm unmounted filters—Luminance, Red, Green, and Blue—crafted using single-substrate glass with Chroma’s durable sputtered hard coatings, eliminating the need for laminations and ensuring long-term performance. Primary filter coatings are applied to the front surface, with anti-reflection coatings on the rear to suppress ghosting and maximize light transmission for cleaner, higher-contrast images. Designed for consistency in the field, the precisely controlled bandpasses remain spectrally stable, resisting drift even under extreme temperature changes or humidity fluctuations—so you can count on accurate color balance and repeatable results night after night! This LRGB set will fit virtually all filter drawers/holders and wheels on the market. However, please verify this with your accessory before purchase.*
Spectral Transmission Details
| Filter | Wavelength Range | Center Wavelength (CWL) |
|---|---|---|
| Luminance (L) | ~400–700nm | 550nm |
| Red (R) | ~600–700nm | 650nm |
| Green (G) | ~500–600nm | 540nm |
| Blue (B) | ~400–500nm | 460nm |
Cleaning, Handling, and Orientation
Handle Chroma filters by the edges only. Clean gently only if necessary. Loose particles should be removed with a bulb puffer or filtered, pressurized air cleaner. If necessary, gently wipe surface using anhydrous alcohol and lint-free lab towels. Use new surface of towel with each wipe.
- Avoid touching or wiping AR coated or metal mirror surfaces.
- Avoid handling exposed coatings with bare fingers.
Proper orientation of the filter is recommended for maximize performance. These filters should be mounted with the coated surface toward the light source and the AR-coated side towards the camera sensor. The AR-coated side can be easily identified because you can look right through the AR side into the filter. The front side, on the other hand, is highly reflective to prevent unwanted light from passing through.
About Chroma Filters
Chroma manufactures the highest quality astronomy filters with durable, sputtered hard coatings using single substrates of the best glass, eliminating the need for laminations. All primary filter coatings are applied on the front surface and anti-reflection coatings on the rear surface to prevent ghosting and to maximize transmission. Highly precise and accurate, the passbands of Chroma filters remain spectrally stable and do not drift in response to extreme temperature fluctuations or changes in humidity. All filters may be used with focal ratios of f/4 or slower.
Specifications
- Type: Luminance (L), Red (R), Green (G), Blue (B)
- Bandpass: Broadpass
- Shape: Round
- Mounting: Unmounted
- Size: 50 mm
- Coating yype: Durable sputtered hard coatings
- Camera side: Anti-reflection coated
- Substrate: Single-piece optical glass
- Glass thickness: 3 mm
Other Information
- Country of Manufacture: United States
Chroma LRGB Filters for Broadband Imaging
The Chroma 50 mm LRGB Filter Set is engineered specifically for serious deep-sky CCD and CMOS imaging, delivering exceptional optical precision and reliability in one premium package. This set includes four 50 mm unmounted filters—Luminance, Red, Green, and Blue—crafted using single-substrate glass with Chroma’s durable sputtered hard coatings, eliminating the need for laminations and ensuring long-term performance. Primary filter coatings are applied to the front surface, with anti-reflection coatings on the rear to suppress ghosting and maximize light transmission for cleaner, higher-contrast images. Designed for consistency in the field, the precisely controlled bandpasses remain spectrally stable, resisting drift even under extreme temperature changes or humidity fluctuations—so you can count on accurate color balance and repeatable results night after night! This LRGB set will fit virtually all filter drawers/holders and wheels on the market. However, please verify this with your accessory before purchase.*
Spectral Transmission Details
| Filter | Wavelength Range | Center Wavelength (CWL) |
|---|---|---|
| Luminance (L) | ~400–700nm | 550nm |
| Red (R) | ~600–700nm | 650nm |
| Green (G) | ~500–600nm | 540nm |
| Blue (B) | ~400–500nm | 460nm |
Cleaning, Handling, and Orientation
Handle Chroma filters by the edges only. Clean gently only if necessary. Loose particles should be removed with a bulb puffer or filtered, pressurized air cleaner. If necessary, gently wipe surface using anhydrous alcohol and lint-free lab towels. Use new surface of towel with each wipe.
- Avoid touching or wiping AR coated or metal mirror surfaces.
- Avoid handling exposed coatings with bare fingers.
Proper orientation of the filter is recommended for maximize performance. These filters should be mounted with the coated surface toward the light source and the AR-coated side towards the camera sensor. The AR-coated side can be easily identified because you can look right through the AR side into the filter. The front side, on the other hand, is highly reflective to prevent unwanted light from passing through.
About Chroma Filters
Chroma manufactures the highest quality astronomy filters with durable, sputtered hard coatings using single substrates of the best glass, eliminating the need for laminations. All primary filter coatings are applied on the front surface and anti-reflection coatings on the rear surface to prevent ghosting and to maximize transmission. Highly precise and accurate, the passbands of Chroma filters remain spectrally stable and do not drift in response to extreme temperature fluctuations or changes in humidity. All filters may be used with focal ratios of f/4 or slower.
Specifications
- Type: Luminance (L), Red (R), Green (G), Blue (B)
- Bandpass: Broadpass
- Shape: Round
- Mounting: Unmounted
- Size: 50 mm
- Coating yype: Durable sputtered hard coatings
- Camera side: Anti-reflection coated
- Substrate: Single-piece optical glass
- Glass thickness: 3 mm
| Manufacturer | Chroma Technologies |
|---|
- 1x Luminance filter - 50 mm unmounted
- 1x Red filter - 50 mm unmounted
- 1x Blue filter - 50 mm unmounted
- 1x Green filter - 50 mm unmounted
- Engineered for deep-sky CCD & CMOS astrophotography.
- LRGB 50 mm unmouted filter set for compatability with a wide array of filter wheels.
- Parfocal for systems f/4.0 or slower.
Chroma LRGB Filters for Broadband Imaging
The Chroma 50 mm LRGB Filter Set is engineered specifically for serious deep-sky CCD and CMOS imaging, delivering exceptional optical precision and reliability in one premium package. This set includes four 50 mm unmounted filters—Luminance, Red, Green, and Blue—crafted using single-substrate glass with Chroma’s durable sputtered hard coatings, eliminating the need for laminations and ensuring long-term performance. Primary filter coatings are applied to the front surface, with anti-reflection coatings on the rear to suppress ghosting and maximize light transmission for cleaner, higher-contrast images. Designed for consistency in the field, the precisely controlled bandpasses remain spectrally stable, resisting drift even under extreme temperature changes or humidity fluctuations—so you can count on accurate color balance and repeatable results night after night! This LRGB set will fit virtually all filter drawers/holders and wheels on the market. However, please verify this with your accessory before purchase.*
Spectral Transmission Details
| Filter | Wavelength Range | Center Wavelength (CWL) |
|---|---|---|
| Luminance (L) | ~400–700nm | 550nm |
| Red (R) | ~600–700nm | 650nm |
| Green (G) | ~500–600nm | 540nm |
| Blue (B) | ~400–500nm | 460nm |
Cleaning, Handling, and Orientation
Handle Chroma filters by the edges only. Clean gently only if necessary. Loose particles should be removed with a bulb puffer or filtered, pressurized air cleaner. If necessary, gently wipe surface using anhydrous alcohol and lint-free lab towels. Use new surface of towel with each wipe.
- Avoid touching or wiping AR coated or metal mirror surfaces.
- Avoid handling exposed coatings with bare fingers.
Proper orientation of the filter is recommended for maximize performance. These filters should be mounted with the coated surface toward the light source and the AR-coated side towards the camera sensor. The AR-coated side can be easily identified because you can look right through the AR side into the filter. The front side, on the other hand, is highly reflective to prevent unwanted light from passing through.
About Chroma Filters
Chroma manufactures the highest quality astronomy filters with durable, sputtered hard coatings using single substrates of the best glass, eliminating the need for laminations. All primary filter coatings are applied on the front surface and anti-reflection coatings on the rear surface to prevent ghosting and to maximize transmission. Highly precise and accurate, the passbands of Chroma filters remain spectrally stable and do not drift in response to extreme temperature fluctuations or changes in humidity. All filters may be used with focal ratios of f/4 or slower.
Specifications
- Type: Luminance (L), Red (R), Green (G), Blue (B)
- Bandpass: Broadpass
- Shape: Round
- Mounting: Unmounted
- Size: 50 mm
- Coating yype: Durable sputtered hard coatings
- Camera side: Anti-reflection coated
- Substrate: Single-piece optical glass
- Glass thickness: 3 mm
Other Information
- Country of Manufacture: United States
| Manufacturer | Chroma Technologies |
|---|
- 1x Luminance filter - 50 mm unmounted
- 1x Red filter - 50 mm unmounted
- 1x Blue filter - 50 mm unmounted
- 1x Green filter - 50 mm unmounted
