Dual Channel Controller for Dew-Not Dew Remover - Model DNC02
This item is discontinued by the manufacturer and is no longer available.
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Introducing Dew-Not's NEW Dual Channel Controller!
Do you want to power several Dew-Not strips from a single power source? Or exercise finer control over the power output of Dew-Not strips? Then the Dual Channel Controller is what you need.
The new DNC02 is a microprocessor-based dual channel controller. Each channel controls two outputs for a total of four outputs (these can be increased using a DNS splitter (sold separately). Each channel can be controlled to provide an output ranging from 0% to 100%. Best results are normally achieved with an initial setting between medium and high.
The DNC02 is manufactured for operation on 12 volts DC. Total amperage capacity for all four outputs is 10 amps. The controller is supplied with a six foot cord equipped with a cigarette lighter plug end. A 10 amp fuse is incorporated into the plug. The controller features a UL 94V0 enclosure and is virtually RFI free.
The new DNC02 also features a two stage low battery indicator:
• If the voltage drops to 11 volts the power led begins slow blinking as a low voltage warning
• If the battery voltage drops to 10.5 volts the power led starts fast blinking and the outputs turn off. This is done to prevent permanent damage to battery packs
• When the voltage recovers to over 12 volts it will start operating again
Velcro is provided for attachment. Power cord length is 66". 1 year limited manufacturers warranty.
Other Information
- Country of Manufacture: United States
Introducing Dew-Not's NEW Dual Channel Controller!
Do you want to power several Dew-Not strips from a single power source? Or exercise finer control over the power output of Dew-Not strips? Then the Dual Channel Controller is what you need.
The new DNC02 is a microprocessor-based dual channel controller. Each channel controls two outputs for a total of four outputs (these can be increased using a DNS splitter (sold separately). Each channel can be controlled to provide an output ranging from 0% to 100%. Best results are normally achieved with an initial setting between medium and high.
The DNC02 is manufactured for operation on 12 volts DC. Total amperage capacity for all four outputs is 10 amps. The controller is supplied with a six foot cord equipped with a cigarette lighter plug end. A 10 amp fuse is incorporated into the plug. The controller features a UL 94V0 enclosure and is virtually RFI free.
The new DNC02 also features a two stage low battery indicator:
• If the voltage drops to 11 volts the power led begins slow blinking as a low voltage warning
• If the battery voltage drops to 10.5 volts the power led starts fast blinking and the outputs turn off. This is done to prevent permanent damage to battery packs
• When the voltage recovers to over 12 volts it will start operating again
Velcro is provided for attachment. Power cord length is 66". 1 year limited manufacturers warranty.
Introducing Dew-Not's NEW Dual Channel Controller!
Do you want to power several Dew-Not strips from a single power source? Or exercise finer control over the power output of Dew-Not strips? Then the Dual Channel Controller is what you need.
The new DNC02 is a microprocessor-based dual channel controller. Each channel controls two outputs for a total of four outputs (these can be increased using a DNS splitter (sold separately). Each channel can be controlled to provide an output ranging from 0% to 100%. Best results are normally achieved with an initial setting between medium and high.
The DNC02 is manufactured for operation on 12 volts DC. Total amperage capacity for all four outputs is 10 amps. The controller is supplied with a six foot cord equipped with a cigarette lighter plug end. A 10 amp fuse is incorporated into the plug. The controller features a UL 94V0 enclosure and is virtually RFI free.
The new DNC02 also features a two stage low battery indicator:
• If the voltage drops to 11 volts the power led begins slow blinking as a low voltage warning
• If the battery voltage drops to 10.5 volts the power led starts fast blinking and the outputs turn off. This is done to prevent permanent damage to battery packs
• When the voltage recovers to over 12 volts it will start operating again
Velcro is provided for attachment. Power cord length is 66". 1 year limited manufacturers warranty.
Other Information
- Country of Manufacture: United States