IDAS Night Glow Suppression Filter - ZWO 42mm and 54mm (Gen 2) Filter Drawer Mount
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Contiguous US / Lower 48:
Free shipping applies to orders over $50 using our chosen carrier/method. Faster paid options are available at checkout.
Alaska, Hawaii & US Territories:
Free shipping applies to many—but not all—products. Enter your ZIP code in cart or upon checkout to confirm options and costs.
International:
International orders do not qualify for free shipping. Shipping, duties, brokerage, tariffs, and taxes are the customer’s responsibility. Some items may be restricted due to export, size, or manufacturer limitations.
About IDAS NGS1-DZ Filters:
The IDAS DZ framed filters are mounted in a 3d printed holder and designed to be inserted directly into the following ZWO filter drawers:
- ZWO FD-M54-II (M54 Filter Drawer Gen / Type II)
- ZWO FD-M42-II (M42 Filter Drawer Gen / Type II)
The clear aperture of the 2" version of this IDAS filter is 43mm. You can certainly use that with ZWO's filter holder in the above filter drawers. However, these 3d cell-mounted DZ filters have a larger clear aperture of 47mm, reducing the chances of vignetting when used with full frame cameras. All DZ filters have a glass subtrate that is 2mm thick.
IDAS Night Glow Suppression Filter:
The NGS1 is the world-first filter that suppresses both man-made and night glow interferences to the green, orange and red ranges. This is the same filter that was previously sold as the IDAS LPS-D3.
Night Glow: OI (557.7nm, 630.0nm, 636.4nm), NaI (589.0nm, 589.6nm)
The NGS1 the successor of the conventional IDAS light pollution cut filters, and thus can suppress the inteference from white LED lights. This filter is also effective against low- and high-pressure sodium lamp pollutions.
Night glow interferenced image (photo taken by Shigemi Numasawa):
Image ideally processed to reproduce the NGS1:effect
The NGS1 is designed based on the same concept as of the other IDAS light pollution cut filters so that it maxmizes the transfer of the light emissions from various emission nebulae, C2 comae of comet heads and CO+ ionized tails of comet tails as well as coninuous spectrum emissions from space. Its transmittance range is intentionally shifted to the longer wave length side. allowing margins for "the shift tendency towards the shorter wave length side against oblique incidences" typically associated with thin-film interference filters. The NGS1 can almost fully transfer the abovementioned nebular emission lines under the conditions , for example, where the incidence of the parallel flux is kept below 14 degrees, or a lens of the F value 2 or faster (or 1.4 or faster depending on lens) is used before this filter.
The NGS1 filter utilizes the IGAD (ion-Gun AssistDeposition) coating technology which has been applied to our coventional light pollution cut filters. The IGAD technology densifies the multi-layers - the heart of interference filters - resulting in the physical properties that cannot be obtained from the conventional multi-layers.
- Highly durable thin layers of which hardness equals to quartz glasses. Tremendously improved adherence between the
substrate and the multi-layers set. - Absolutely almost no aging variation in optical spectral characteristics due to temperature and humidity change as
far as used in the regular human living environments.
*This product is an interference filter. Its spectrum characteristics will be subject to the incidence of incoming light. Please carefully read the following instruction for proper use:
When the NGS1 is placed before the lens:
Use a lens having the light incidence angle of 14 degrees or lower (field angle of 34 degrees or lower).
Specifications:
- M48 x 0.75
- Filter thickness: 2.0mm (Previous version NGS1-48mmS was 2.5mm thick)
- Lightweight frame
Other Information
- Country of Manufacture: Japan
About IDAS NGS1-DZ Filters:
The IDAS DZ framed filters are mounted in a 3d printed holder and designed to be inserted directly into the following ZWO filter drawers:
- ZWO FD-M54-II (M54 Filter Drawer Gen / Type II)
- ZWO FD-M42-II (M42 Filter Drawer Gen / Type II)
The clear aperture of the 2" version of this IDAS filter is 43mm. You can certainly use that with ZWO's filter holder in the above filter drawers. However, these 3d cell-mounted DZ filters have a larger clear aperture of 47mm, reducing the chances of vignetting when used with full frame cameras. All DZ filters have a glass subtrate that is 2mm thick.
IDAS Night Glow Suppression Filter:
The NGS1 is the world-first filter that suppresses both man-made and night glow interferences to the green, orange and red ranges. This is the same filter that was previously sold as the IDAS LPS-D3.
Night Glow: OI (557.7nm, 630.0nm, 636.4nm), NaI (589.0nm, 589.6nm)
The NGS1 the successor of the conventional IDAS light pollution cut filters, and thus can suppress the inteference from white LED lights. This filter is also effective against low- and high-pressure sodium lamp pollutions.
Night glow interferenced image (photo taken by Shigemi Numasawa):
Image ideally processed to reproduce the NGS1:effect
The NGS1 is designed based on the same concept as of the other IDAS light pollution cut filters so that it maxmizes the transfer of the light emissions from various emission nebulae, C2 comae of comet heads and CO+ ionized tails of comet tails as well as coninuous spectrum emissions from space. Its transmittance range is intentionally shifted to the longer wave length side. allowing margins for "the shift tendency towards the shorter wave length side against oblique incidences" typically associated with thin-film interference filters. The NGS1 can almost fully transfer the abovementioned nebular emission lines under the conditions , for example, where the incidence of the parallel flux is kept below 14 degrees, or a lens of the F value 2 or faster (or 1.4 or faster depending on lens) is used before this filter.
The NGS1 filter utilizes the IGAD (ion-Gun AssistDeposition) coating technology which has been applied to our coventional light pollution cut filters. The IGAD technology densifies the multi-layers - the heart of interference filters - resulting in the physical properties that cannot be obtained from the conventional multi-layers.
- Highly durable thin layers of which hardness equals to quartz glasses. Tremendously improved adherence between the
substrate and the multi-layers set. - Absolutely almost no aging variation in optical spectral characteristics due to temperature and humidity change as
far as used in the regular human living environments.
*This product is an interference filter. Its spectrum characteristics will be subject to the incidence of incoming light. Please carefully read the following instruction for proper use:
When the NGS1 is placed before the lens:
Use a lens having the light incidence angle of 14 degrees or lower (field angle of 34 degrees or lower).
Specifications:
- M48 x 0.75
- Filter thickness: 2.0mm (Previous version NGS1-48mmS was 2.5mm thick)
- Lightweight frame
About IDAS NGS1-DZ Filters:
The IDAS DZ framed filters are mounted in a 3d printed holder and designed to be inserted directly into the following ZWO filter drawers:
- ZWO FD-M54-II (M54 Filter Drawer Gen / Type II)
- ZWO FD-M42-II (M42 Filter Drawer Gen / Type II)
The clear aperture of the 2" version of this IDAS filter is 43mm. You can certainly use that with ZWO's filter holder in the above filter drawers. However, these 3d cell-mounted DZ filters have a larger clear aperture of 47mm, reducing the chances of vignetting when used with full frame cameras. All DZ filters have a glass subtrate that is 2mm thick.
IDAS Night Glow Suppression Filter:
The NGS1 is the world-first filter that suppresses both man-made and night glow interferences to the green, orange and red ranges. This is the same filter that was previously sold as the IDAS LPS-D3.
Night Glow: OI (557.7nm, 630.0nm, 636.4nm), NaI (589.0nm, 589.6nm)
The NGS1 the successor of the conventional IDAS light pollution cut filters, and thus can suppress the inteference from white LED lights. This filter is also effective against low- and high-pressure sodium lamp pollutions.
Night glow interferenced image (photo taken by Shigemi Numasawa):
Image ideally processed to reproduce the NGS1:effect
The NGS1 is designed based on the same concept as of the other IDAS light pollution cut filters so that it maxmizes the transfer of the light emissions from various emission nebulae, C2 comae of comet heads and CO+ ionized tails of comet tails as well as coninuous spectrum emissions from space. Its transmittance range is intentionally shifted to the longer wave length side. allowing margins for "the shift tendency towards the shorter wave length side against oblique incidences" typically associated with thin-film interference filters. The NGS1 can almost fully transfer the abovementioned nebular emission lines under the conditions , for example, where the incidence of the parallel flux is kept below 14 degrees, or a lens of the F value 2 or faster (or 1.4 or faster depending on lens) is used before this filter.
The NGS1 filter utilizes the IGAD (ion-Gun AssistDeposition) coating technology which has been applied to our coventional light pollution cut filters. The IGAD technology densifies the multi-layers - the heart of interference filters - resulting in the physical properties that cannot be obtained from the conventional multi-layers.
- Highly durable thin layers of which hardness equals to quartz glasses. Tremendously improved adherence between the
substrate and the multi-layers set. - Absolutely almost no aging variation in optical spectral characteristics due to temperature and humidity change as
far as used in the regular human living environments.
*This product is an interference filter. Its spectrum characteristics will be subject to the incidence of incoming light. Please carefully read the following instruction for proper use:
When the NGS1 is placed before the lens:
Use a lens having the light incidence angle of 14 degrees or lower (field angle of 34 degrees or lower).
Specifications:
- M48 x 0.75
- Filter thickness: 2.0mm (Previous version NGS1-48mmS was 2.5mm thick)
- Lightweight frame
Other Information
- Country of Manufacture: Japan