WandererAstro Wanderer Box Plus V3
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Contiguous US / Lower 48:
Free shipping applies to orders over $50 using our chosen carrier/method. Faster paid options are available at checkout.
Alaska, Hawaii & US Territories:
Free shipping applies to many—but not all—products. Enter your ZIP code in cart or upon checkout to confirm options and costs.
International:
International orders do not qualify for free shipping. Shipping, duties, brokerage, tariffs, and taxes are the customer’s responsibility. Some items may be restricted due to export, size, or manufacturer limitations.
WandererBox Plus V3
Power Ports & Switches
- 1x Normally open DC output
- DC5525, internally directly connected to the input port, maximum 10A.
- 1x 5-13.2V regulator output
- DC5521, adjustable voltage, switchable, maximum current 5A.
- 1x Dew heater (or switch) output
- DC5521, can control the power of dew heater, can also be used as a switch, maximum current 8A.
- 3x DC switch output
- DC551, switchable, maximum total current 8A.
USB Ports
- 2x USB3.1 outputs can be used to connect cameras for high-speed readout.
- 3x USB2.0 outputs can be used to connect other devices such as equatorial mounts, WandererCovers, etc.
- All USB output ports share a 5V 5A power supply capacity, which can power a USB dew heater.
- Maximum 5A continuous current.
- Built in 12V-5V step-down module.
Power Input
The 5-13.2V adjustable regulator (can be turned off) easily copes with input voltage changes and ensures stable power supply to the camera.
Adjustable voltage meets the requirements of different devices.
Long input power cables may cause voltage drops, and the power supply voltage of remote observatories may also be unstable. This DC port will maintain a stable set voltage, which is essential for stable operation of the camera. Some cameras may have image readout problem when the voltage is lower than 12V or unstable. **The operating voltage of some devices (such as most SLR cameras) is not 12V, and the adjustment range of 5 to 13.2V is suitable for most devices.
This DC port can also be switched on and off.
Automatic and intelligent Dew Heater Control
- 1x DHT22 temperature & humidity sensor
- 1x temperature probe
- Manual control: Manually adjust the duty cycle of the PWM port to control the power of the dew heater (0-255).
- Constant temperature control: WandererBox will keep the dew heater temperature constant at the set value.
- Dew point temperature difference mode: WandererBox will regulate the temperature of the dew heater to maintain a fixed value higher than the dew point. It saves power and prevents condensation effectively. It also ensures that the dew heater does not overheat, ensuring good image quality.
Other Features
- Excellent visualization interface.
- Voltage, current, dew point temperature monitoring and other information are clear at a glance.
- Maximize the security of WandererBox itself and connected devices
- Short Circuit, Overcurrent, Electrostatic, and Surge Protection
- The environment of a remote observatory can be harsh, and the normal operation of the equipment is very important. WandererAstro specially designed the WandererBox series to protect the safety and stability of the equipment as much as possible.
- Working status is clear, with power indicator lights.
- The power light is dim and won't affect your dark environment. Of course, you can also cover the power light.
- M6 and M4 threaded holes on the bottom
- You can use the Mini Dovetail Plate to secure the Wanderer Dew Terminator to your dovetail slot. You can also use screws to fix it to a dovetail board or any structure with holes.
Specifications
- Power Input:
- 12 V
- DC 5.5x2.5mm
- 10A max
- DC Output:
- DC1 (5525):
- Always On 12V Output
- Cannot be switched on/off
- 10A max
- DC2 (5521):
- 0-13.2 V Adjustable Regulated Output
- Can be switched on/off together
- 3A max in total
- DC3 (5521):
- PWM/Switch Output
- Can be switched on/off
- PWM control possible
- 8A max
- DC4-6 (5221):
- 12V Switch Output
- Can be switched on/off together
- 8A max in total
- DC1 (5525):
- USB Hub
- 2x USB3.1
- 3x USB2.0
- Can be switched on/off together
- USB Power Supply: 5V 5A
- Voltage/Current Monitor
- Input current/voltage monitor
- Size (cm): 8.6 x 6.5 x 2.6
- Weight: 150g
- Environment Sensor (included)
- 1 x DHT22 temperature & humidity sensor
- 1x DS18B20 temperature probe
- Dew Heater Control: 1 dew heater
- Dewpoint temperature difference control
- Constant temperature control
- Manual control
- ASCOM Compatibility: Yes
- Screw Holes: M6 and M4 screw holes, 4mm deep
Please note that this product cannot be controlled through the ZWO ASIAIR app. WandererAstro's flat panels, camera rotators, dust covers and power boxes are controlled via their WandererEmpire app or other software that supports ASCOM such as N.I.N.A.
Other Information
- Country of Manufacture: China
- Wanderer Astro: Two-year factory limited warranty.
WandererBox Plus V3
Power Ports & Switches
- 1x Normally open DC output
- DC5525, internally directly connected to the input port, maximum 10A.
- 1x 5-13.2V regulator output
- DC5521, adjustable voltage, switchable, maximum current 5A.
- 1x Dew heater (or switch) output
- DC5521, can control the power of dew heater, can also be used as a switch, maximum current 8A.
- 3x DC switch output
- DC551, switchable, maximum total current 8A.
USB Ports
- 2x USB3.1 outputs can be used to connect cameras for high-speed readout.
- 3x USB2.0 outputs can be used to connect other devices such as equatorial mounts, WandererCovers, etc.
- All USB output ports share a 5V 5A power supply capacity, which can power a USB dew heater.
- Maximum 5A continuous current.
- Built in 12V-5V step-down module.
Power Input
The 5-13.2V adjustable regulator (can be turned off) easily copes with input voltage changes and ensures stable power supply to the camera.
Adjustable voltage meets the requirements of different devices.
Long input power cables may cause voltage drops, and the power supply voltage of remote observatories may also be unstable. This DC port will maintain a stable set voltage, which is essential for stable operation of the camera. Some cameras may have image readout problem when the voltage is lower than 12V or unstable. **The operating voltage of some devices (such as most SLR cameras) is not 12V, and the adjustment range of 5 to 13.2V is suitable for most devices.
This DC port can also be switched on and off.
Automatic and intelligent Dew Heater Control
- 1x DHT22 temperature & humidity sensor
- 1x temperature probe
- Manual control: Manually adjust the duty cycle of the PWM port to control the power of the dew heater (0-255).
- Constant temperature control: WandererBox will keep the dew heater temperature constant at the set value.
- Dew point temperature difference mode: WandererBox will regulate the temperature of the dew heater to maintain a fixed value higher than the dew point. It saves power and prevents condensation effectively. It also ensures that the dew heater does not overheat, ensuring good image quality.
Other Features
- Excellent visualization interface.
- Voltage, current, dew point temperature monitoring and other information are clear at a glance.
- Maximize the security of WandererBox itself and connected devices
- Short Circuit, Overcurrent, Electrostatic, and Surge Protection
- The environment of a remote observatory can be harsh, and the normal operation of the equipment is very important. WandererAstro specially designed the WandererBox series to protect the safety and stability of the equipment as much as possible.
- Working status is clear, with power indicator lights.
- The power light is dim and won't affect your dark environment. Of course, you can also cover the power light.
- M6 and M4 threaded holes on the bottom
- You can use the Mini Dovetail Plate to secure the Wanderer Dew Terminator to your dovetail slot. You can also use screws to fix it to a dovetail board or any structure with holes.
Specifications
- Power Input:
- 12 V
- DC 5.5x2.5mm
- 10A max
- DC Output:
- DC1 (5525):
- Always On 12V Output
- Cannot be switched on/off
- 10A max
- DC2 (5521):
- 0-13.2 V Adjustable Regulated Output
- Can be switched on/off together
- 3A max in total
- DC3 (5521):
- PWM/Switch Output
- Can be switched on/off
- PWM control possible
- 8A max
- DC4-6 (5221):
- 12V Switch Output
- Can be switched on/off together
- 8A max in total
- DC1 (5525):
- USB Hub
- 2x USB3.1
- 3x USB2.0
- Can be switched on/off together
- USB Power Supply: 5V 5A
- Voltage/Current Monitor
- Input current/voltage monitor
- Size (cm): 8.6 x 6.5 x 2.6
- Weight: 150g
- Environment Sensor (included)
- 1 x DHT22 temperature & humidity sensor
- 1x DS18B20 temperature probe
- Dew Heater Control: 1 dew heater
- Dewpoint temperature difference control
- Constant temperature control
- Manual control
- ASCOM Compatibility: Yes
- Screw Holes: M6 and M4 screw holes, 4mm deep
Please note that this product cannot be controlled through the ZWO ASIAIR app. WandererAstro's flat panels, camera rotators, dust covers and power boxes are controlled via their WandererEmpire app or other software that supports ASCOM such as N.I.N.A.
- 1x WandererBox Plus V3
- 1x USB3.0 data cable (0.5m)
- 1x DC5521 to RCA adapter cable (0.1m)
- 1x Temp probe (1m)
- 1x Temp and humidity sensor (1m)
- 1x 5521 female to 5525 male adapter
WandererBox Plus V3
Power Ports & Switches
- 1x Normally open DC output
- DC5525, internally directly connected to the input port, maximum 10A.
- 1x 5-13.2V regulator output
- DC5521, adjustable voltage, switchable, maximum current 5A.
- 1x Dew heater (or switch) output
- DC5521, can control the power of dew heater, can also be used as a switch, maximum current 8A.
- 3x DC switch output
- DC551, switchable, maximum total current 8A.
USB Ports
- 2x USB3.1 outputs can be used to connect cameras for high-speed readout.
- 3x USB2.0 outputs can be used to connect other devices such as equatorial mounts, WandererCovers, etc.
- All USB output ports share a 5V 5A power supply capacity, which can power a USB dew heater.
- Maximum 5A continuous current.
- Built in 12V-5V step-down module.
Power Input
The 5-13.2V adjustable regulator (can be turned off) easily copes with input voltage changes and ensures stable power supply to the camera.
Adjustable voltage meets the requirements of different devices.
Long input power cables may cause voltage drops, and the power supply voltage of remote observatories may also be unstable. This DC port will maintain a stable set voltage, which is essential for stable operation of the camera. Some cameras may have image readout problem when the voltage is lower than 12V or unstable. **The operating voltage of some devices (such as most SLR cameras) is not 12V, and the adjustment range of 5 to 13.2V is suitable for most devices.
This DC port can also be switched on and off.
Automatic and intelligent Dew Heater Control
- 1x DHT22 temperature & humidity sensor
- 1x temperature probe
- Manual control: Manually adjust the duty cycle of the PWM port to control the power of the dew heater (0-255).
- Constant temperature control: WandererBox will keep the dew heater temperature constant at the set value.
- Dew point temperature difference mode: WandererBox will regulate the temperature of the dew heater to maintain a fixed value higher than the dew point. It saves power and prevents condensation effectively. It also ensures that the dew heater does not overheat, ensuring good image quality.
Other Features
- Excellent visualization interface.
- Voltage, current, dew point temperature monitoring and other information are clear at a glance.
- Maximize the security of WandererBox itself and connected devices
- Short Circuit, Overcurrent, Electrostatic, and Surge Protection
- The environment of a remote observatory can be harsh, and the normal operation of the equipment is very important. WandererAstro specially designed the WandererBox series to protect the safety and stability of the equipment as much as possible.
- Working status is clear, with power indicator lights.
- The power light is dim and won't affect your dark environment. Of course, you can also cover the power light.
- M6 and M4 threaded holes on the bottom
- You can use the Mini Dovetail Plate to secure the Wanderer Dew Terminator to your dovetail slot. You can also use screws to fix it to a dovetail board or any structure with holes.
Specifications
- Power Input:
- 12 V
- DC 5.5x2.5mm
- 10A max
- DC Output:
- DC1 (5525):
- Always On 12V Output
- Cannot be switched on/off
- 10A max
- DC2 (5521):
- 0-13.2 V Adjustable Regulated Output
- Can be switched on/off together
- 3A max in total
- DC3 (5521):
- PWM/Switch Output
- Can be switched on/off
- PWM control possible
- 8A max
- DC4-6 (5221):
- 12V Switch Output
- Can be switched on/off together
- 8A max in total
- DC1 (5525):
- USB Hub
- 2x USB3.1
- 3x USB2.0
- Can be switched on/off together
- USB Power Supply: 5V 5A
- Voltage/Current Monitor
- Input current/voltage monitor
- Size (cm): 8.6 x 6.5 x 2.6
- Weight: 150g
- Environment Sensor (included)
- 1 x DHT22 temperature & humidity sensor
- 1x DS18B20 temperature probe
- Dew Heater Control: 1 dew heater
- Dewpoint temperature difference control
- Constant temperature control
- Manual control
- ASCOM Compatibility: Yes
- Screw Holes: M6 and M4 screw holes, 4mm deep
Please note that this product cannot be controlled through the ZWO ASIAIR app. WandererAstro's flat panels, camera rotators, dust covers and power boxes are controlled via their WandererEmpire app or other software that supports ASCOM such as N.I.N.A.
Other Information
- Country of Manufacture: China
- Wanderer Astro: Two-year factory limited warranty.
- 1x WandererBox Plus V3
- 1x USB3.0 data cable (0.5m)
- 1x DC5521 to RCA adapter cable (0.1m)
- 1x Temp probe (1m)
- 1x Temp and humidity sensor (1m)
- 1x 5521 female to 5525 male adapter
WandererAstro Wanderer Box Plus V3