William Optics 0.8x Reducer / Adjustable Field Flattener 6AIII for FLT91 Telescope
Stock count is accurate & shown in real time.
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
- This item is out of stock.
- Sign up for back-in-stock alerts to be notified when this item becomes available (account login required).
Contiguous US / Lower 48:
Free shipping applies to orders over $50 using our chosen carrier/method. Faster paid options are available at checkout.
Alaska, Hawaii & US Territories:
Free shipping applies to many—but not all—products. Enter your ZIP code in cart or upon checkout to confirm options and costs.
International:
International orders do not qualify for free shipping. Shipping, duties, brokerage, tariffs, and taxes are the customer’s responsibility. Some items may be restricted due to export, size, or manufacturer limitations.
0.8x Reducer / Adjustable Field Flattener 6AIII for FLT91 Telescope
All New Adjustable Flat6AIII with M92 thread adapter for use with the new WO FLT91 telescope (M48-threaded T-mount not included). This is the same item as the P-FLAT6AIII reducer/flattener sold for other WO telescopes with the addition of an M92-M63 adapter to adapt the Flat6AIII to the M92 threads on the rear of the FLT91.
This very elegant 2" reducer/field flattener has been designed to optimize the flat-field imaging performance of William Optics F/6 to F7.5 ratio refactors, including the new FLT91 telescope. WO Flat 6AIII will provide good illumination and flat field across 97% of full frame sized sensors.
- Full frame size
- Designed with nearly Full frame chip-size DSLR cameras in mind.
- FMC triplet APO design.
- Produced entirely with the best Ohara optical glasses.
- Amazing
- Reducing factor 0.8X.
- Adjustable design, for perfect back focus it can be used with other models of refractor
- 48mm filter ready
- Superb Finish
- William Optics polished anodized finish.
- All internal surfaces threaded and blackened to prevent reflections.
- Easy to Use
- Will accept any standard 48mm wide T-ring for your camera (not included). Not compatible with smaller 42mm T rings.
- Suitable for
- New FLT91 scope (with included M92 adapter)
- GT71, GT81, Z81, Z103 WO scopes (without using the included M92 adapter)
- Adjustment Setting
- FLT91: 5.4mm plus a standard back focus requirement of 55mm from base of M48 thread to sensor
Other Information
- Country of Manufacture: Taiwan
0.8x Reducer / Adjustable Field Flattener 6AIII for FLT91 Telescope
All New Adjustable Flat6AIII with M92 thread adapter for use with the new WO FLT91 telescope (M48-threaded T-mount not included). This is the same item as the P-FLAT6AIII reducer/flattener sold for other WO telescopes with the addition of an M92-M63 adapter to adapt the Flat6AIII to the M92 threads on the rear of the FLT91.
This very elegant 2" reducer/field flattener has been designed to optimize the flat-field imaging performance of William Optics F/6 to F7.5 ratio refactors, including the new FLT91 telescope. WO Flat 6AIII will provide good illumination and flat field across 97% of full frame sized sensors.
- Full frame size
- Designed with nearly Full frame chip-size DSLR cameras in mind.
- FMC triplet APO design.
- Produced entirely with the best Ohara optical glasses.
- Amazing
- Reducing factor 0.8X.
- Adjustable design, for perfect back focus it can be used with other models of refractor
- 48mm filter ready
- Superb Finish
- William Optics polished anodized finish.
- All internal surfaces threaded and blackened to prevent reflections.
- Easy to Use
- Will accept any standard 48mm wide T-ring for your camera (not included). Not compatible with smaller 42mm T rings.
- Suitable for
- New FLT91 scope (with included M92 adapter)
- GT71, GT81, Z81, Z103 WO scopes (without using the included M92 adapter)
- Adjustment Setting
- FLT91: 5.4mm plus a standard back focus requirement of 55mm from base of M48 thread to sensor
0.8x Reducer / Adjustable Field Flattener 6AIII for FLT91 Telescope
All New Adjustable Flat6AIII with M92 thread adapter for use with the new WO FLT91 telescope (M48-threaded T-mount not included). This is the same item as the P-FLAT6AIII reducer/flattener sold for other WO telescopes with the addition of an M92-M63 adapter to adapt the Flat6AIII to the M92 threads on the rear of the FLT91.
This very elegant 2" reducer/field flattener has been designed to optimize the flat-field imaging performance of William Optics F/6 to F7.5 ratio refactors, including the new FLT91 telescope. WO Flat 6AIII will provide good illumination and flat field across 97% of full frame sized sensors.
- Full frame size
- Designed with nearly Full frame chip-size DSLR cameras in mind.
- FMC triplet APO design.
- Produced entirely with the best Ohara optical glasses.
- Amazing
- Reducing factor 0.8X.
- Adjustable design, for perfect back focus it can be used with other models of refractor
- 48mm filter ready
- Superb Finish
- William Optics polished anodized finish.
- All internal surfaces threaded and blackened to prevent reflections.
- Easy to Use
- Will accept any standard 48mm wide T-ring for your camera (not included). Not compatible with smaller 42mm T rings.
- Suitable for
- New FLT91 scope (with included M92 adapter)
- GT71, GT81, Z81, Z103 WO scopes (without using the included M92 adapter)
- Adjustment Setting
- FLT91: 5.4mm plus a standard back focus requirement of 55mm from base of M48 thread to sensor
Other Information
- Country of Manufacture: Taiwan
William Optics 0.8x Reducer / Adjustable Field Flattener 6AIII for FLT91 Telescope